Black PETG Filament – 1.75 mm
$24.00 – $120.00
- Description
- Additional information
- Reviews (1)
Description
Our Black PETG filament (Polyethylene Terephthalate Glycol modified) has the durability of ABS with the characteristics of PLA for your 3D printer allowing you to make anything! PETG advantages include:
- Excellent layer adhesion
- Warp resistance
- Reduced shrinkage
- Higher density
- Chemical resistance to both acidic and alkali compounds
- Flexible printing on glass, acrylic, glass, blue tape and polyimide tape
- Odorlessness during printing
Black PETG Settings
Optimal Print Temp: 230°-260° C
Optimal Bed Temp: 70°-100° C
Print Speed: 25-50mm/sec
Glue is NOT recommended for adhering this filament to the print bed
Spool Sizes | 10 Kilograms | 5 Kilograms | 2.25 Kilograms | 1 Kilogram |
---|---|---|---|---|
Hub Diameter (mm) | - | 53.98 | 53.98 | 52.71 |
Spool Diameter (mm) | 406.4 | 304.80 | 298.45 | 203.20 |
Spool Thickness (mm) | 390.53 | 184.15 | 117.48 | 73.15 |
Important Advantages of PETG Filament in 3D Printing
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Size | 1 Kilogram, 2.25 Kilograms, 5 Kilograms |
Steve –
So far Makeshaper PETG is the best PETG filament I have used. This cliché has probably been over used when describing the printing characteristics of filament but, “this stuff prints like butter”! Once I dialed it in by calibrating the extruder and finding the correct extrusion multiplier it printed consistent sized parts that had about as perfect layers as one can get with an FDM printer. I’ve used both the Black and Red colors and have obtained the same outstanding results in print quality! Found that printing at 245/85 worked great for me with no stringing.