Join Waitlist We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.

7 Amazing Ways to optimize the Finish of your 3D Printed Object

7 Amazing Ways to optimize the Finish of your 3D Printed Object

There are several ways to improve the finish of your 3D prints and get better prototypes at a faster rate. 3D printing is a form of additive manufacturing that is used by many companies for producing the parts of a product or for prototyping as well. 3D printing by using ASA filament is done with the help of a computer, which lays down one layer after the other of a specific pattern to print your desired product. In 3D printing, mostly plastics or metals are used for obtaining the final model.

In this article, we will include for you 7 excellent tips that are going to help you in printing finer 3D objects with sharper edges (not literally) but with a clearer definition. Our goal is to help you print models that stand out from the rest. Therefore, continue reading to know more.

1-Set the height of the nozzle and level the bed accordingly:

One of the primary ways to improve the quality of 3D prints is by making sure that the bed of printing is well leveled and the distance of the nozzle is accurately set. You can make use of a feeler gauge or a sheet of paper to measure the distance between the bed and the nozzle. Make sure that the nozzle of the printer is clean, especially while working with ASA filament.When the distance between the printing bed and the nozzle is set correctly, there will be minimum resistance in pulling out the gauge or paper.

In case if you are re-inserting the gauge or the paper, they will slide back underneath without any additional force. Make sure to repeat this procedure of inserting and removing the paper or the gauge from between the bed and the nozzle to make sure the distance is appropriate.

2-Measure the temperature of the nozzle:

The quality of your 3D prints will be directly affected by the temperature of the nozzle of your 3D printer. If in case, the temperature of the nozzle is very high, it can leave behind the strings of ASA filament between separate parts of your printed objects. When you are trying to print tall models, with a high temperature of the nozzle, the lower layers will start melting down, ruining the entire print.

Therefore, when you plan on printing taller prints, make sure to add a one-centimeter cubical built on the other side of the building plate. This will help in removing the hotter parts of the nozzle from the print and will offer them some time to cool off. In case you notice any filament strings in between the structures, you can either use ooze or wall shield structure, which is one of the most common features included in slicer programs.

3-Identify the perfect bed temperature:

Controlling the bed or the build plate temperature will help dramatically in enhancing the adhesive properties of printing. As the model begins to print, each layer will start shrinking automatically once the model starts to cool. This is going to give a more refined finish to your 3D prints, specifically when you are working with ASA filament. Therefore, each layer above the build plate starts to contract, and the shrinking layers tend to pull away from the edges of the print out from the bed.

On the other hand, when the temperature of the building plate is not checked, the prints can develop something known as the “elephant feet.” This should be your cue to decrease the temperature of the bed for your next project.

4-Make use of different printing plates:

Different build plates are known to be yielding different textures on the 3D printed objects. Building plate materials such as –PEI, Kapton tape, or glass leave smooth textures on the printing surface, whereas –painter’s tape or glue-on polycarbonate sheets are known for imparting matt finish to the sheets. If you are making use of glue or spray on the surface of the 3D prints, make sure to use enough of the substance to stick the prints, but not in excess, which could further lead to malformation of the 3D objects or might leave behind dents on it.

Also, the excessive usage of spray or glue when combined with ASA filamentprints can cause you difficulty in removing the final objects from the bed. And if you forced more than the structures can resist, you might even damage your 3D prints. Therefore, make sure to conduct a few experiments before you come to a conclusion.

5-Pay attention to the maintenance and adjustment of the printer:

Every 3D printer has the features that make it stand out from the rest, and probably there are different things in every 3D printer, which would require specific attention in order to fetch you extraordinary results. Therefore, to optimize your 3D prints, you need to take small steps that include the lubrication or cleaning of the rails as instructed by the manufacturer. If your 3D printer consists of two-stepper motors for the printing of the Z-axis, ensure that the gantry is located at the same height on either side.

Do not forget to check the time and again for any sort of wobbling noticed in the frame. Although working with the ASA filament is one of the most convenient choices that you can make, your 3D printer should also be in its best condition to impart relevant results.

6-Treat the printing filament with meticulous care:

Many filaments are hydrophilic in nature, and they tend to absorb water from the surrounding atmosphere. The exposed filaments, such as ABS or PLA, flexible, and nylon materials, have a tendency to absorb moisture, which ultimately causes many problems when printing 3D models. However, the benefit of using ASA filamentyou will face no such difficulties. Typically, the damp filaments expand when extrusion takes place as the moisture absorbed forms bubbles or steams out of the printed plastic.

As a result, the filament either crackles or pops and comes out through the nozzle, and when you take a closer look, you will notice that something like smoke is oozing out of the prints. However, this is not even the main problem. You will notice these errors affecting your entire 3D printed model, as the ultimate product is going to have an uneven finish. To avoid this mistake, make sure to store the filaments in plastic bins with decessants.

7-Learn to use a slicer:

Enhancing 3D printing quality is almost impossible if you didn’t make use of slicers. A slicer is a type of software that converts the 3D model into a set of instructions in the form of a G-code, which will ultimately be used to drive the printer. You will find many 3D slicers that are available for free, which you can easily pick up and learn the way it works. Once you do so, you will notice how drastically the prints of your 3D models will have improved.

If your 3D printing by using ASA filament isn’t as neat as you expect it to be, you can look for “hyper” or “fine” quality settings. It will probably slow down the rate of printing, but you can rest assured that the ultimate results which you are going to obtain will be worth the wait. Also, make sure not to jump to a different slicer as soon as you get any bumpy results. In fact, conduct your research with more precision and master the slicer that you had picked in the first place to enhance the quality.

Bottom Line:

When you are beginning your 3D printing project, do not panic or lose hope too soon. Also, don’t expect perfect results in the first few tries. Another tip that you must keep in mind is, do treat every change of ASA filamentas a new filament, specifically when you have left the roll in the open. When you notice any kind of problem with the quality of the prints, do not rush to change everything at once. Instead, take your time and change one thing at a time.

While you are making any changes with the settings of the printer, take notes for future reference. And notice the pattern in which the quality of your 3D prints change. Keep in mind that every print you obtain is an opportunity for you to discover something new about your printer.

Are you looking for a reliable source to purchase ASA filament? Then if you buy from MakeShaper, you won’t be disappointed, and that is a guarantee. We have a plethora of collections of all the highest quality filaments available. If you are looking for getting more pleasing prints of your 3D projects, then make sure to purchase top-notch quality printing filaments from us at a discounted rate.

Share this post