Join Waitlist We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.

Monthly Archives - June 2020

Must-Know Tips to Print with HIPS Filament!

HIPS is the abbreviation used for High Impact Polystyrene, which is a dissolvable material. The HIPS filament is used for providing support to the 3D structures along with ABS. Before HIPS filament is used as a support material for printing 3D objects, it is dissolved in d-Limonene, which leaves behind your printed stuff free of any markings, even when the support material is removed. ABS and HIPS filaments are considered to be the dual extrusion partners for 3D printing of the structures because they have similar properties that help in easy printing.

Also, the best part about using HIPS filament along with ABS is –HIPS is not only an excellent support material but also is slightly lighter in weight as compared to the ABS. That is why HIPS should be considered for the printing of parts that wear out quickly or can be used in the application of creating products that can benefit from the lighter weight of the filament.

Now that you have had a basic idea about what HIPS filamentis, read on further to know the essential details that will come to help for efficient 3D printing programs.

Pros of using HIPS Filament:

  • Cost-effective
  • Water and impact resistant
  • Lightweight
  • Easily dissolvable in d-Limonene

Cons of using HIPS Filament:

  • Heating chamber needed
  • A heating bed is required
  • Ventilation recommended
  • The temperature of printing is high

Hardware requirements for HIPS Filament:

Before you start using the HIPS filamentfor the purpose of 3D printing, make sure that all the hardware requirements of utilizing the filament are well met. Here we have listed the requirements for obtaining top-notch quality printing by using HIPS:

1-Heating Bed: You will need a heating bed whose temperature should be within the range of 100-115°C. Also, make sure that the foundation offers a complete enclosure.

2-Extruder: No special hot-ends for the Extruder are needed. However, its temperature should be enabled between 230-245°C.

3-Build Surface: For building the appropriate surface for printing, you will need:

  • Glass Plate
  • Glue stick
  • PET Sheets
  • Kapton Tape

4-Cooling: No need for a part cooling fan

Best practices for using HIPS Filament:

We have listed a few tips that will reduce the chances of making common errors while using HIPS filament for the purpose of 3D printing. Read on to know:

1-Building surface should be appropriate:

You can make use of the Kapton Tape for applied on the heated platform, which helps in the creation of an ideal surface that will enable the HIPS to adhere to. The thickness of each layer of Kapton tape is about 0.1 mm, so you should consider this while measuring the layer settings. You can also use PET sheets to apply over the glass beds to enhance the adhesive properties of the tape while ensuring the smooth finishing of the surface. These solutions will assist in mitigating the 3D objects from your HIPS prints.

2-Temperature for printing needs to be high:

You will have to increase the temperature of the 3D parts of the prints that surround the support material so that the HIPS filament is prevented from contracting rapidly. Such ambiance can be accomplished by making use of a build environment that is enclosed and which allows the heating bed to gradually increase the temperature of the air by the desired amount. Also, there are several printers available today in the market, which is equipped with a heated chamber, outside of the box that will make the printing process even more accessible.

3-Make adjustments to prevent the separation of layers:

When you are about to print by using HIPS filament, you will have to take some extra care to make sure that each layer of printing is well-bonded to the layer above. Otherwise, you will notice some cracks or splits beings formed between the layers. To enhance the bonding between each layer, consider reducing the height of the sheet, or you can also increase the temperature of the intruder. If you make both of these changes while printing, it will dramatically improve the quality of adhesion between the layers.

Some Pro Tips to consider:

  • Some of the HIPS filaments available in the markets are provided with additives that make your 3D printing journey reasonably easier. But, these additives, when frequently used, can make the support material harder and difficult to dissolve. This will leave out marks in the 3D printed objects while you are getting rid of the HIPS filament. Therefore, choose your product wisely.
  • To improve the quality of adhesion offered by the heating best, you can make use of ABS slurry. You DIY the mixture by dissolving some of the pieces of ABS filament along with acetone and then apply the mixture to the surface of your printing bed.

Safety Measures while using HIPS Filaments:

Though HIPS filament is safe with food items, completely recyclable, non-toxic, non-hygroscopic, it has one single downside just as the ABS filament –releases fumes while being used. The filament releases styrene into the air, which, when you breathe, can rapidly enter into your lungs. When you are conducting 3D prints by using HIPS filamentin large quantities, make sure to be extra careful and employ an adequate ventilation system in the printing room.

High dosage of styrene intake can affect your nervous system and show symptoms of –color vision change, tiredness, slow reaction timing, and often affects your body balance too. However, it is nothing to worry about when you are printing, a minimal amount of styrene is released, and that won’t affect your health in any way. What we mean to say here is –install a proper ventilation system in the printing rooms, which will prove to be beneficial in the future.

Bottom Line:

The HIPS filament is a support material which is frequently used along with ABS for accomplishing the 3D printing projects. In this blog, we have stated all the essential information that you need to have while you are working with HIPS filament. The best part about using HIPS as a support material is –it can be easily removed from the 3D prints without even leaving behind any mark. All you need to do is dissolve the material in d-Limonene, and you are good to go. Also, carefully read the blog to gather up some pro tips that will enhance your process of working with the HIPS filaments.

The HIPS filament from MakeShaper can be extensively used for carrying out several 3D printing projects. You can entirely rely upon our products and rest assured that you are going to get desired printing results. For the creating of incredible 3D objects, you will need robust support material such as the HIPS filaments. And at MakeShaper, we understand your needs. You can visit our official page to have a look at all the featured products available with us. Also, do not forget to use the code VILLAGE20 to get a 20% discount on your purchase.

Read previous blog: Top 8 Cool Gifts You Can Make with 3D Printer Filament

Top 8 Cool Gifts You Can Make with 3D Printer Filament

3D printers are a fun-filled way of creating cute and cool gifts for your loved ones and showing your creativity. And these 3D gifts prepared from the best 3D printer filament have taken off and are blowing up everyone’s mind. Now the creators are making use of this advanced technology of printing to create all sorts of beautiful and wild 3D printer projects, which were previously everything but impossible to be built at home. These 3D printed projects could be a great addition to your online designing portfolio too.

3D printing is gaining rapid popularity, and if you adopt this form of chic creativity, you could easily win some new clients within no time. Do 3D printed articles interest you too? Then read on this blog to know more about the coolest printing trends that we have listed here.

 1-The Earphone Case:

If there is one thing that we can all agree on is –that the earphones are really difficult to manage, and the cords give us all a hard time to remain organized. They tangle quite often and result in producing the most dreaded earphone crackle due to the disruption in the wires. This renders the treasured music playlist as useless. However, with the use of the best 3D printer filament, you can now improve your everyday life and create a super-cute and viable earphone case.

2-Pen Holders:

Do you ever feel that no matter how hard you try, your work desk sometimes turns into a mess, and all the stationery that you use for your projects are lying here and there? Well, then we have got the perfect solution for you! You can now create a pen holder with an exciting design pattern, which will not only enhance the aesthetics of your work table but also will keep it managed. The pen holder can hold pens of different shapes and sizes; you can also use the stand to store your paintbrushes, pencils, and other stationeries.

3-A fruit bowl:

Are you in the mood for the creation of some exquisite dinnerware? You can do that now with the help of the best 3D printer filament. Take some time out to create your favorite 3D printed fruit bowl, comprising of your desired pattern and shape. For example, you can now customize bowls or plates of different themes, such as –blueberry themed containers. So what is stopping you now? You can avail of several other designs and patterns of dinnerware either to gift your friends or simply to enhance the look of the food served.

4-Planters:

Are you still using the traditional planters to hold your plants and decorate your home? It is time that you added a little change to spruce up the looks of interior design. The beautiful 3D design patterns for planters will make you forget the conventional clay pots for your favorite plants. So what are you waiting for? Use your 3D printer to create some amazingly designed planters for a modular design and make your mini-garden even more attractive. These modern-day pots can turn into a form of unique gifts. You can use these pots to gift them to your friends, colleagues, or family member with a small house-plant and promote the green revolution as well.

5-Measuring Cubes:

It is time that you got rid of those boring and monotonous measuring spoons from your kitchen. Now you must wonder what we are going to ask you to replace them with! We have some really fresh ideas that will help you create measuring cubes that could be an easy, aesthetic, yet stylish replacement for the measuring spoons, which can be easily created with your 3D printers. All you need to do is give your desired measurements to the best 3D printer filament that you own, and you can have your personalized cubes, which you can use for measuring the ingredients. Also, if you have a friend or a member of the family who is fond of cooking, you can gift them these super-awesome measuring cubes.

6-Cable holders:

Are you too worried about the tyrannous cable cords that take up most of the space on your desk or disrupt the fun by messing up the wires of the entertainment unit? Well, then we have got the perfect solution for you. Now create 3D printed cable management holders that are space-saving and prevent the wires from being tangled as well. They can help you cut back on the desk clutter and minimize all that cable-related aggravations. These are one of the blessed 3D printed objects that can make the life of a tech-junkie a little less annoying. You can gift these cable holders to someone fond of technology yet is worried by the tangled cords making their lives messier. Your cute small gift can be the savior.

7-Combs:

Yes! You read it right! Our next suggestion is to create combs with your best 3D printer filament. This is one of the most straightforward projects that you can do with your 3D printer, yet it is one of the most useful objects in our daily lives. Almost all of us need combs or brushes in our daily lives to keep our untamed locks from becoming a messy, tangled nest of hair. Also, the creation of combs is quite simple, so why not give it a try?

8-A Book holder:

Do you have a nerd friend in your group who is absolutely fond of books? It is time that you gifted them something other than their favorite list of books, isn’t it? This, we think, is one of the coolest and the best 3D creations in our suggestion list for the bookworms. The book holders can be one easy solution from keeping the pages from being propped open. It is time that you created one for your book lover friend to make their life even more amazing!

Bottom Line:

Our list here comprises of the top 8 cool projects that you can create with your best 3D printer filament. There are so many other things that you can consider creating with your 3D printers. All you need to do is think and have an imagination and boom! You are finding yourself creating some of the most fantastic gift items either for the purpose of selling or gifting. So what are you waiting for? Get started with your cool 3D projects today!

Are you looking for the best 3D printer filament, which can help you in creating some of the cool above-mentioned 3D projects? Then you have landed up in the correct place. At MakeShaper, we deal with the most exceptional quality of 3D printing filaments that will cater to your needs for the creation of highest-quality 3D objects. Choose from our list of inventory closeout that is available as long as supplies last. Pay $10 for 1kg, $18 for 2.25kg, and $36 for 5kg. Buy today!

Tips to succeed in 3D printing by using PVA Support Material

The PVA filament is a key material for the creation of complex parts with the 3D printer on a dual extrusion. If you haven’t used this material yet for creating 3D printing structures, then you are missing out on something outstanding. And you should continue reading this article to find out more about the PVA filaments and learn all the tips and tricks that will cater to you and lead to success.

What do you understand by PVA filament?

When 3D printing is concerned, PVA is the acronym of PolyVinyl Alcohol. It is the same material, which is used in the laundry detergent pods for dissolving in the wash. And the exact principle is used in the creation of the dissolvable support material. Most of the glue sticks are basically Polyvinyl Alcohol; therefore, the filament is comprised essentially into a printable yet solid glue stick for the making of 3D objects.

When should the PVA Filament be used?

Firstly, for the use of PVA filament,you will need a dual extrusion 3D printer. And you are advised to use the PVA Filaments along with PLA as the primary material. The reason we ask you to combine these two materials is PLA prints just at the same temperature as PVA. The dissolvable support material imparts shine to your 3D model and makes sure that the intricate models are highlighted well. And the reason you should use the dissolvable material is –it helps in the creation of specific internal cavities that impart the third dimension to the model and makes it appear more detailed.

Imagine if you had to print a tubular spiral with the help of an auto-generated similar type of support material, at one point of time, you would fail to break away the internal support provided, and the outer layers of your model will have scars from where the support material was supposed to be attached. But, when you make use of the PVA dissolvable support material, you can give it a quick soak and sit back and wait for it to show its charm.

Read: How 3D Printing is Making Businesses More Efficient?

What is the optimum temperature of printing with the PVA Filament?

The brand of PVA filamentthat you are using for your model entirely depends on the optimum temperature for printing. Generally, if you want to have an idea about it, you can print with the PVA 1Filaments at 185 ± 15°C. However, sometimes some of the brands direct their filaments to be used at 215 ± 5°C. Make sure never to go higher than these temperatures. In most cases, you wouldn’t have to. But, we would suggest you read the user manual thoroughly before you get ahead with the work. The reason we recommend not to increase the temperature higher than the above-mentioned is because PVA filaments are prone to cooking, and they can easily carbonize in the nozzle.

As a matter of fact, PVA Filaments have a quick tendency to form clogs quickly. Therefore, we suggest you kept the printing temperatures low and make sure to get the dissolvable support material out of the nozzle when not in use.

Make sure to dry the PVA filament before use:

Just as nylon, PVA filament is a hygroscopic material that means it can absorb water from the surrounding air quite quickly. Thus, when you first open the roll of the PVA filament, make sure to stash the desiccant in the container to store your PVA in the sealed container when not in use. If in case you forget to stash the desiccant and let the roll sit out for a long time, you will notice that your PVA filament starts popping and hissing when you use it for printing. This indicates that the filament has absorbed moisture.

But, you do not have to worry; you can still resolve the issue by merely drying it in the oven for a few hours to extract all the absorbed water from it and then make sure to stash it in a sealed container. When you make use of wholly dried filament, you can get excellent finishing and translucent work texture. However, in case the filament has absorbed even the slightest amount of moisture, the support is not as clear as it should be, and it turns into a yellowish-white texture with complete opacity.

How to dissolve the filament?

The best way that we have come across for cleaning off the PVA filamentsupport material is by breaking it off as much as you can before you proceed to the soaking process. However, you need to be extracareful about not damaging the minute details and intricate designs while you are breaking off the material. Take precautions while removing off the support material and make use of precise skills not to affect the parts that might be encased with the PVA.

Once you have removed all the extra parts of the PVA filament from the base model, you can proceed towards submerging your print in a container with warm water.Also, you do not want the temperature of the water to be at a boiling hot level, as it might damage the PLA material that you have used for printing. However, the hotter the water is, the quicker the PLA support material is going to dissolve. To make things clear for you –you can consider this example: if you won’t take a bath in that water, then you shouldn’t be putting your 3D printed model in it.

When shouldn’t you be using the PVA Filament?

It is evident by now that PVA Filament is an excellent support material for the creation of 3D prototypes. But you cannot use it every time. The use of the PVA filament depends on the base material that you are using for the printing purpose, and also your storage needs are going to affect your decision. PVA materials are excellent for the creation of prototypes, but they shouldn’t be used for the materials that need storage for a long time period, as they are quick to absorb moisture.

Bottom Line:

It is imperative that you made use of the PVA filamentafter you have had gathered complete information on the material in order to obtain the best results. For using it efficiently, you will need a dual extrusion 3D printer. And as we have suggested above, PLA filament should be used in combination with the 3D filaments as these two materials tend to make the best combination. With these, you can create objects with precise and intricate detailed designs.

Are you looking around for the best brand to buy your PVA filament? Well, at MakeShaper, we are known for the quality of products that we deliver. The PVA Filaments that we sell are of the highest quality, and they are manufactured in a way keeping in mind the needs of our users. To order your first batch of PVA support material from us, call us at 1-330-753-0100, today!